Just over 2 weeks since Closing and I was finally able to bring the chicken flock to the Hive House. There was an unexpected kink in my moving plans that delayed their arrival and sent me prematurely into a construction project that I hadn’t entirely prepared for. The ending result was a pair of twin chicken tractors and the Runamuk flock set up on the garden at our new #foreverfarm location.
Change in Plans
It was the nature of this particular real estate transaction that I did not have the opportunity to walk the property at leisure with an analytical eye before I bought it. Up until the day I came to the Hive House as it’s new owner, all I had to go by to prepare Runamuk and my family for the move were the pictures from the real estate listing, and Google Earth images. It wasn’t until I could tour the facilities and the land on my own that I could really take stock of the property’s assets and weaknesses.
Originally the plan had been to convert one of the barn stalls into a winter coop-space that would house the flock until after the dust settled on the #GreatFarmMove when I could then construct moveable chicken tractors to get the birds out on pasture. I had hoped to just put up a few roosts and cut a pop-hole in the back wall of the barn that would lead the chickens into a fenced yard. This space would house them through the winter, with the addition of a hoop-house off the back of the building. However, when I surveyed the barn at length for the first time I realized that was not going to work.
What I found in that back corner stall were the remnants of a dairy trough, and above that-on three walls were broad shelves where the previous owners had housed various sporting gear. It would have been challenging for me to try to take down the shelving to put up roosts and nesting boxes, but the real clincher was what lay on the outside of the back corner of the barn.
The first issue was that the entire back wall of the barn had been sheathed in sheet metal; I would have to cut into it if I intended to have a pop-hole. Secondly, the bug shack is right off that corner of the barn, with a very lovely spruce tree growing alongside it─directly in the path of my would-be hoop-house. And 3rd: there’s a pop-up garage sitting flush alongside the back of the barn.
Looking around for a more suitable spot, I decided upon the lean-to on the garage as winter coop housing for the chickens. It’s not completely enclosed, but there’s a back wall and a good roof, with solid posts and beams supporting it. Formerly this space had housed the previous owner’s snowblower and yard equipment. That would be a bigger project than the chicken tractors however, and since I want to be able to house the chickens on pasture through the remainder of the season anyway, I opted to focus on those first so I could get the birds moved over as soon as possible.
The Chicken Tractor Project
There are many different styles of chicken tractor out there; Joel Salatin has had great success with his set up, and I really like the chicksaw concept, but with my preference to use PVC in construction John Suscovich’s system was easier to adapt to meet Runamuk’s needs. With that in mind I set out to create a chicken tractor that would be small and light enough that I could move it across the pasture on my own, provides a minimum of 50-feet of roost space for Runamuk’s 50 birds, which would also offer maximum amount of nesting space without weighing the overall structure down too much.
Striving to keep the overall structure as light as possible, I used 2x4s for the frame, 2x3s for the vertical roost supports, and 1x3s for the horizontal roosts as well as for the framing on the nesting boxes.
Half-inch schedule 40 grey PVC (which I prefer because it is UV resistant and does not degrade in the sun as quickly as the white PCV) made up my hoops, and I covered the exterior with chick-wire that was fastened to the hoops with zip-ties or stapled to the wooden frame with a light-duty staple gun.
The nesting boxes hang off the sides of the coop, made up of quarter-inch exterior sheathing and this lightweight but weather-resistant material I found in the garden and cut up to serve as a flap for easy egg-collection.
The ending result was a pair of twin hoop-coop style moveable chicken tractors, each with 14 feet of nesting space and 35 feet of roost space. With tires on the back end I can use my utility dolly to hook onto the front and roll the coop forward to a new location.
Lessons in Preparation
Normally I’m extremely fastidious about preparation when it comes to construction projects, dedicating plenty of time to designing a plan and supply list. This time I was caught by surprise. When I realized I was going to have to stop everything two-thirds of the way through my #GreatFarmMove to construct housing for the flock, I merely put a sketch on paper with some dimensions and jotted down a supply list along the side of the page.
As a result of my lack of planning, there were a couple things I had overlooked and when I had to run for more supplies it was a bit of a trek from my new location in New Portland to the nearest lumber yard or hardware store in Madison. Having to run for materials or parts eats up a lot of time when living so remotely, and the chicken tractor project was a valuable lesson in preparation for life at the Hive House.
I also had to learn how to use a power saw. I’ve traditionally used a simple handsaw for most construction, and asked the man in my life to do any bigger cuts that required the use of power saws. Big whirling blades of death frighten me and I’ve avoided confronting those fears, preferring smaller power tools like my drill, and my weed-whacker. However this was a bigger project with a lot of cuts and I am the man in my life now, so I decided it was time to learn this skill. I started small, with a battery-powered ryobi circular saw─it’s probably the smallest and cutest circular saw out there lol─so it was less threatening than most saws.
The Chickens Have Landed at the Hive House!
The chicken tractors are finished now, and the chickens have landed at the hive house. I have just a few more car loads this week to finish up the moving and then I think I can start unpacking lol. It feels really great to have the work-spaces that Runamuk needs─so far I’ve assembled bee equipment in the barn, wrapped soap in the upstairs craft room, and celebrated with friends in the Bug Shack. I wake up each day eager to get to the work that this farm provides me, and I go to bed each night sore, but happy. I am focused on the task at hand: growing this farm and ensuring it’s longevity. Every day is an adventure, and life is good.
Thanks for reading! Subscribe by email to receive the latest from Runamuk directly to your in-box, or follow @runamukacres on Twitter or Instagram for a behind the scenes look at life on this bee-friendly farm!